This Seplos Mason 280L battery bundle provides everything you need to create a DIY 48V 14.3kWh battery system, but with a more cost-effective cell option.
What's Included:
- SEPLOS Mason 280L (vertical) kit
- 16 Grade B Envision 280Ah Lithium Iron Phosphate (LiFePO4) cells
- SEPLOS Grade B Busbars
- V3 Seplos BMS
Ideal for DIY Home Energy and Solar Storage:
This DIY kit offers a modular design, allowing you to parallel additional units for increased capacity.
Communication and Compatibility:
The included Seplos BMS (with Bluetooth) facilitates communication with various inverters via CAN & RS485 protocols, including Victron, Growatt, Sofar, Solis, and more (refer to the manufacturer's website for a complete inverter compatibility list).
Envision Grade B Cells:
This upgraded bundle utilises Grade B Envision cells, offering a balance between performance and affordability. While they may have slight cosmetic imperfections, they still deliver reliable energy storage.
- Exceptional lifespan: Delivers at least 6,000 cycles when used at a depth of discharge (DOD) of 80%.
- Safe and efficient: Operates within a 0.5C charge and discharge rate, with a voltage range of 2.5V to 3.65V.
Envision Cell Specifications:
- Manufacturer: Envision
- Capacity: 280Ah
- Size: 72mm x 200mm x 172.5mm
- Weight: Approximately 5.35KG
- Maximum Discharge: 280A (1C)
- Nominal Voltage: 3.2V
- Cycle Life: 6,000 cycles at 80% DOD.
16 * Grade B Envision 280 Cells
1 * Battery Case (Bottom case, Top Bracket, Top cover)
1 * 48V 200A 16S Seplos V3 BMS
1 * 58V 400A Fuse
4 * Handle
2 * PCB Board for BMS and Cell Connection
3 * Upper and Lower Latch lock
1 * LCD Screen
1 * LCD Screen Sticker
4 * Button Cap
3 * Wires (LCD Screen wire, PCB board A and PCB board Connector)
2 * Battery Terminals (P+ Terminal and P- Terminal)
Other components included:
6 * Copper bus bars (BMS connection)
15 * Aluminium bus bars (cell connection)
10 * Epoxy sheet (between cell and the case)
26 * EVA Tape (between cells)
1 * PC sheet (top cover)
Screw details:
12 * Phillip Hex M4 * 8mm (PCB board fix)
9 * Phillip Hex M5 * 8mm + Washer + Spring Set (ground cable and top bracket fix)
7 * Phillip Hex M6 * 25mm + Washer + Spring Set (front Panel fix)
10 * Phillip Round M3 * 8mm + Washer + Spring Set (BMS and LCD Screen fix)
12 * Phillip Pan M5 * 10mm (latch fix)
16 * Hexagon Socket Pan M4 * 10mm (P+/P- Terminals fix)
42 * Hexagon Socket Countersunk M4 * 10mm (Handle and battery case)
4 * Phillip Hex M6 * 14mm + Washer + Spring Set (foot fix)
5 * Phillip Hex M8 * 10mm + Washer + Spring Set (P+/P- Bus bar fix)
8 * Phillip Round M5 * 10mm + Washer
What is not included in this kit that you will need:
Inverter Connection Cables
CAN or RS485 Communication Cables (often supplied with inverter)
Seplos RJ45 to USB Cable (to connect to PC for BMS software).